EORT/HASS Integrated Environment Testing Chamber
Specification
EORT/HASS Integrated Environment Testing Chamber has been admired by most advanced industries since its birth, and the users are very satisfied with the results of the EORT/HASS Integrated Environment Testing Chamber screening of product defect rate. Through the analysis of the screening data, they believe that the product will change the temperature and humidity quickly, and Under the comprehensive test of multi-axis vibration, the service life and potential defects of the product at the beginning of production or development can be screened out, because the defects can be quickly exposed under the combined action of temperature and mechanics. Reduced the defective rate of the products, making the products of the company more competitive in the same industry. EORT/HASS Integrated Environment Testing Chamber is more and more recognized and valued by more similar industries such as electronics, netcom, etc.
EORT-V/HASS Comprehensive Environmental Test Chamber cover
temperature,humidity, thermal shock with rapid temperature change rate, vibration testing. It has been respected by most advanced industries since its inception.
Companies using EORT-V Chamber are very satisfied with the screening results of product defect rates through EOS-V Chamber. Through screening data analysis, they believe that products can be quickly changed in temperature and humidity, and Under the comprehensive test of multi-axis vibration, the service life and potential defects of the product at the beginning of production or development can be screened out, because the defects will be quickly exposed under the comprehensive action of temperature and mechanics.
The EOST-V Chamber is increasingly recognized and valued by more electronics, Netcom, and other similar industries.rage, in order to evaluate the performance of the sample under given environmental conditions.
Product Usage
The simulation product detects whether the adaptability and characteristics of the product itself have changed under the combined conditions of temperature and humidity in the climate environment (high and low temperature operation & storage, temperature cycle, high temperature and high humidity, low temperature and low humidity, condensation experiment. etc.).
Need to meet the requirements of international standards (IEC, JIS, GB, MIL...) to achieve international consistency in measurement procedures (including test procedures, conditions, and methods) to avoid differences in perception and reduce the range of uncertain factors in measurement occur.
| volume | 512L。 |
| inner size | W800 mm×D800 mm×H800 mm。 |
| outer size | According to drawings |
| weight | 1650㎏。 |
| Test environmental conditions | 。The ambient temperature is + 25 ° C, the relative humidity is ≤85%, and there is no sample in the test chamber. |
| Test method | GB/T 5170.2—1996 Temperature test equipment |
| GB/T 5179.2—1996 Humidity test equipment | |
| temp. range | -50℃～150℃。 |
| hum. range | 15% ～ 98%RH。 |
| control accuracy | a.Temp： 0.01℃。 |
| b.Hum：±0.1%RH。 | |
| uniformity | a.Temp：±2.0℃。 |
| b.Hum：+2.0%RH or-3.0%RH。 | |
| stability | a.Temp：±0.3℃。 |
| b. Hum：±2%RH。 | |
| pre-heating temp. range | +RT～+150℃。 |
| heating time | 30min。Note: The temperature rise time is the performance when the heat storage zone operates alone. |
| pre-cooling temp. range | -20℃ ～ -70℃。 |
| cooling time | 70 min。Note: The cooling time is the performance when the low temperature area is operated alone |
| Impact test method | Pneumatic damper switching |
|
temp. impact condition |
+25℃→+45℃：1min。 |
| +45℃→+65℃：1min。 | |
| +65℃→+45℃：1min。 | |
| +45℃→-5℃：2min。 | |
| -5℃→-25℃：1min。 | |
| -25℃→+10℃：1min。 | |
| Stabilization time of heating impact | 5min。 |
| Stabilization time of cooling impact | 8min。 |
| hum. range | 20%RH - 98%RH |
| Relative humidity deviation | ±3.0%RH （humidity＞75%RH时）。 |
| ±5.0%RH （humidity≤75%RH时）。 |
Our services
Pre-Sales
1.Technical consultation: test method, laboratory planning and suggestion.
2.Equipment selection: selection scheme, FAQ.
3.Product testing scheme.
In-Sales
- 1.Customer communication and progress report.
- 2.Guidance for pre-installation preparation,equipment commissioning and test run.
- 3.Calibration (when Third Party's verification is required)
After-Sales
- 1.Technical training: operation of equipment, daily maintenance,common fault diagnosis and troubleshooting.
- 2.Scheduled on-site service: Detection of problem as soon as possiblein order to eliminate equipment and anthropogenic hazards. This is toensure long term and stable equipment operation as well as delivery oflatest technical information.
- 3.Technical support: special paid services are provided according tocustomer's needs.
Q1：How to get testing solution and quotation?
A1：If your product requires environmental testing, please contact us to get testing solution and quotation. We will respond to your request within
12 hours.
Q2：How to contact us?
A2：1.Phone: +886 976 590 796
2. E-mail: sales@zh-talents.com
Q3：How to place an order?
A3：If all the details of the products are confirmed,we can draft a contact to you.Also you can send the PO to us by mail.
Q4：How to deal with equipment problems and how to guarantee after-sales service?
A4：If there is problem with the equipment, please contact us and we will reply within 12 hours and arrive at your site within 48 hours.
We have after-sales service offices in Southeast Asia, Taiwan, Hong Kong and other places, and cooperative service providers in other regions.
Q5：How is the product packaged and shipped through logistics?
A5：1. Use export standard wooden boxes for packaging.
2. Choose the most favorable transportation method. Sea freight, air freight, railway, truck transportation, and multimodal transportation.
3. Fast delivery, some models are in stock and will be shipped in 1-3 days.
