Temperature and Humidity Test Chamber
Temperature and Humidity Test Chamber Basic Introduction:
Temperature and humidity test chamber is widely used to test products' performance under the condition of temperature and humidity combination environment (storage or cycling change).
Temperature humidity test chambers need to meet the requirements of international standard (IEC, JIS, GB, MIL...) which can ensure the manufacture procedures are standard.
Six advantages of temperature and humidity test chamber:
1.No frosting on evaporator when longtime run low temperature and low humidity condition.
2.Save electricity above 30% by automatic control of refrigerant consumption.
3.Can test samples with high heat load.
4.Reach high temperature and high humidity environment(95℃ & 95%RH).
5.Have the ability of utra-low temperature range control .
6.Multi-language selection: Chinese, English, Russian, Korean, Japanese, German multilingual language switching.
|
Model |
ZHS-80-E |
ZHS-150-E |
ZHS-225-E |
ZHS-408-E |
ZHS-1000-E |
|
Interior Size（mm）W*D*H |
400*400*500 |
500*600*500 |
600*500*750 |
800*600*850 |
1000*1000*1000 |
|
Outer Size（mm）W*D*H |
Based on actual size |
||||
|
Temperature Range |
-70℃~+150℃ |
||||
|
Humidity Range |
20~98%R.H |
||||
|
Heating Rate |
-70℃~+150℃ 3℃/min |
||||
|
Cooling Rate |
+25℃~-70℃ 1℃/min |
||||
|
Temperature Uniformity |
≤2 ℃ |
||||
|
Temperature Deviation |
≤±2 ℃ |
||||
|
Humidity Deviation |
≤±3% R.H(＞75%RH) ; ≤±5% R.H(≤ 75%RH) |
||||
|
Temperature Fluctuation |
≤±0.5℃ |
||||
|
Temperature Resolution |
0.1℃ |
||||
|
Cooling Method |
Water cooled/air cooled |
||||
|
Inner Material |
SUS304/316 |
||||
|
External Material |
SPCC steel with powder coating |
||||
|
Reference Standards |
GB/T2423.1 ; GB/T2423.2 ; GB/T2423.3 ; GB/T2423.4 ; GB/T5170.2 ; GB/T5170.5 ; GB/T11158; GB/T10589; GB/T10592; GB/T10586; IEC 60068-3-5 |
||||
Our services
Pre-Sales
1.Technical consultation: test method, laboratory planning and suggestion.
2.Equipment selection: selection scheme, FAQ.
3.Product testing scheme.
In-Sales
- 1.Customer communication and progress report.
- 2.Guidance for pre-installation preparation,equipment commissioning and test run.
- 3.Calibration (when Third Party's verification is required)
After-Sales
- 1.Technical training: operation of equipment, daily maintenance,common fault diagnosis and troubleshooting.
- 2.Scheduled on-site service: Detection of problem as soon as possiblein order to eliminate equipment and anthropogenic hazards. This is toensure long term and stable equipment operation as well as delivery oflatest technical information.
- 3.Technical support: special paid services are provided according tocustomer's needs.
Q1：How to get testing solution and quotation?
A1：If your product requires environmental testing, please contact us to get testing solution and quotation. We will respond to your request within
12 hours.
Q2：How to contact us?
A2：1.Phone: +886 976 590 796
2. E-mail: sales@zh-talents.com
Q3：How to place an order?
A3：If all the details of the products are confirmed,we can draft a contact to you.Also you can send the PO to us by mail.
Q4：How to deal with equipment problems and how to guarantee after-sales service?
A4：If there is problem with the equipment, please contact us and we will reply within 12 hours and arrive at your site within 48 hours.
We have after-sales service offices in Southeast Asia, Taiwan, Hong Kong and other places, and cooperative service providers in other regions.
Q5：How is the product packaged and shipped through logistics?
A5：1. Use export standard wooden boxes for packaging.
2. Choose the most favorable transportation method. Sea freight, air freight, railway, truck transportation, and multimodal transportation.
3. Fast delivery, some models are in stock and will be shipped in 1-3 days.
